Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

A sneaky little trick
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3801
Page 1 of 1

Author:  guitar_ed [ Tue Nov 15, 2005 9:59 am ]
Post subject: 

Hi,

I was trying to glue up the cross supports on my latest guitar, and I use clamps, not a go-deck.

I was trying to get my clamping cauls for the outside of the guitar to hold in position. So what I did was use some double-sticky sided tape to tape the cauls to the clamps. Not the guitar back. Bingo.

Guitar Ed

Author:  LanceK [ Wed Nov 16, 2005 12:33 am ]
Post subject: 

Cool idea!

Author:  Bill N [ Wed Nov 16, 2005 1:19 am ]
Post subject: 

I do something very similar when gluing a bridge.
I use 3 cauls inside the guitar and place a small piece of two sided tape that holds the caul to the clamp while I get it in proper position.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/